Announcement

Collapse
No announcement yet.

OWA 2003 VIA TCP Redirector

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • OWA 2003 VIA TCP Redirector

    Hi all, I've just implemented OWA 2003 via tcp/ip redirector (using a linux server that runs rinetd ( A very small util - that works great! and cost nothing to implement - if you want to know how leave a message )

    my problem is ...
    after i've change the server to use port 443 certification, the owa takes a lot of time to open (even on the server itself), this was not the case when I used port 80, I know there is an overhead when using 443 but is there anything I can do?.

  • #2
    check that you configured the ssl redirection as it described in the following article http://support.microsoft.com/?kbid=839357
    Good Luck

    Shai

    MCSE 2003+Security;MCSE 2003+Messaging
    HP ASE;HP AIS;HP APS

    So, from me to all of you out there, wherever you are, remember:
    the light at the end of the tunnel may be you. Good Day!

    Comment

    Working...
    X