Announcement

Collapse
No announcement yet.

Owa 2003 Sbs R2 Form Access Problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Owa 2003 Sbs R2 Form Access Problem

    Hi,
    this is my first post on Petri forum.
    I have a problem with a form based authentication on outlook web access in local and external access same problem.
    I see the web screen on this form:

    mail.domain.it - /Exchange/Administrator/

    --------------------------------------------------------------------------------

    [Alla directory superiore]
    31/07/2007 12.28 <dir> Attivitą
    31/07/2007 12.28 <dir> Bozze
    31/07/2007 12.28 <dir> Calendario
    19/04/2008 16.49 <dir> Contatti
    31/07/2007 12.28 <dir> Diario
    25/09/2007 17.21 <dir> Feed RSS
    31/07/2007 12.28 <dir> Note
    16/10/2007 11.48 <dir> Posta eliminata
    21/01/2008 16.56 <dir> Posta in arrivo
    03/09/2007 10.45 <dir> Posta in uscita
    22/04/2008 0.17 <dir> Posta indesiderata
    16/10/2007 11.48 <dir> Posta inviata
    03/09/2007 10.45 <dir> Problemi di sincronizzazione

    I have this problem because i have operate this changed in IIS: defualt web site, propriety, home directory, configuration defaultapppool and here enable parent paths in option to resolve errore message for an application that calls an asp method that requires the parent paths option to be enabled.
    I hope my explain it's good.
    Thanks,
    Cosimo Eramo
    Last edited by cosera; 15th May 2008, 09:11.

  • #2
    Re-explain Owa exchange 2003 Sbs R2 display as dos file list

    OWA on Exchange 2003 displays as DOS file list

    Our intranet was not displaying ASP pages and the errr returned was:

    ASP error 0131 The include file <%filename.ext%> cannot contain '..' to indicate the parent directory. /<%path%>/<%filename.ext%>, line <%number%>

    I searched Microsoft KB and found this article:

    http://support.microsoft.com/default...&Product=iis60

    Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
    Double-click your computer name in the left panel, and then double-click Web Sites.
    Locate the Web site and directory that houses the ASP application.
    Right-click the application site or directory, and then click Properties.
    Select Home Directory, and then click Configuration.
    Click Options, and then click to select the Enable Parent Paths check box.
    Click OK two times.

    I followed the instructions and got the ASP pages to work. However now, when accessing OWA, I enter a username and password, but get a directory listing instead of the GUI interface. I can also navigate to other users' mailboxes without authentication.

    I turned off enable parent paths, but it did not correct the issue.

    What can I do now?

    Comment


    • #3
      Re: Owa 2003 Sbs R2 Form Access Problem

      Reset the virtual directories
      http://support.microsoft.com/default.aspx?kbid=883380

      Then run the Connect to the Internet wizard again in the management console.

      You have to be very careful changing anything in IIS as it can break OWA quite easily.

      Simon.
      --
      Simon Butler
      Exchange MVP

      Blog: http://blog.sembee.co.uk/
      More Exchange Content: http://exchange.sembee.info/
      Exchange Resources List: http://exbpa.com/
      In the UK? Hire me: http://www.sembee.co.uk/

      Sembee is a registered trademark, used here with permission.

      Comment


      • #4
        Re: Owa 2003 Sbs R2 Form Access Problem

        OK. Thanks.
        I see the kb883380 and used the first method: use metabase explorer from IIS&.0 resources kit tools. Before restart the server all user are ok to open mailbox with owa in local.
        when restart the server I don't run the Connect to the Internet wizard again in the management console because i have a firewall server with isa 2006 that publish my owa and other service. It's right?
        Thanks,

        Cosimo

        Comment


        • #5
          Re: Owa 2003 Sbs R2 Form Access Problem

          If the ISA 2006 is not on the SBS Server you must still run the wizard to complete the process. SBS is designed to be managed with the wizards - you should not be making changes manually.

          If after running the wizard it works correctly inside but fails outside then you have to look at the ISA server being the cause of the problem.

          Simon.
          --
          Simon Butler
          Exchange MVP

          Blog: http://blog.sembee.co.uk/
          More Exchange Content: http://exchange.sembee.info/
          Exchange Resources List: http://exbpa.com/
          In the UK? Hire me: http://www.sembee.co.uk/

          Sembee is a registered trademark, used here with permission.

          Comment

          Working...
          X