Announcement

Collapse
No announcement yet.

Create bootable Windows 7 image for USB stick with usb 3.0 fails

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Create bootable Windows 7 image for USB stick with usb 3.0 fails

    I am trying to add usb 3.0 drivers to a Windows 7 Enterprise image following this guideline.
    My index is 1.
    Everything works OK until step 14: Add drivers to the mounted image with the command: dism /image:"mount" /add-driver /driver:"c:\wim:\usb3" /recurse
    It did find 3 drivers but it fails to install:
    Error - An error occurred. The driver package could not be installed.
    For more information, check for log files in the <windir>\inf folder of the target image.
    Error: 15105

    DISM log shows me the following:
    dism.txt

    In the next reply I will show the result of the process monitor.
    logfile.xlsx

    What am I missing or doing wrong or can I change so I can continue the instruction and get a bootable Windows 7 USB stick with USB 3.0 during boot and installation?
    Thank you!

  • #2
    Hi i have used this previously, DISM gui version. Much nicer.
    http://www.deploymentninja.com/home/...-with-gui-dism
    The drivers I added were from
    https://sdi-tool.org/
    or http://driverpacks.net/downloads
    Please remember to award reputation points if you have received good advice.
    I do tend to think 'outside the box' so others may not always share the same views.

    MCITP -W7,
    MCSA+Messaging, CCENT, ICND2 slowly getting around to.

    Comment

    Working...
    X