Announcement

Collapse
No announcement yet.

Network trouble ...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Network trouble ...

    Hello,

    I have 2 PCs, both with Windows 7 Ultimate (original comes from my MSDN Technet subscription).

    I have network trouble. I see each PC in the "Network" but impossible to access this PC, impossible to Access B from A and A from B. I choosed "Worked Network" (but I have the same problem with "Home Network".

    These PC can access without any problem to a Synology DS-409+

    I receive this error : Error 0x80070035 network path not found

    My network is 2 PCs + Synology connected to a router Linksys WRT54GL. There is no domain controller.

    Could you help me ?

    Thanks,

  • #2
    Re: Network trouble ...

    Hi,
    Have you got Netbios over TCP/IP enabled?
    Any antivirus software blocking the traffic?
    Caesar's cipher - 3

    ZKHQ BRX HYHQWXDOOB GHFLSKHU WKLV BRX ZLOO UHDOLVH LW ZDV D ZDVWH RI WLPH!

    SFX JNRS FC U6 MNGR

    Comment


    • #3
      Re: Network trouble ...

      Originally posted by L4ndy View Post
      Hi,
      Have you got Netbios over TCP/IP enabled?
      Any antivirus software blocking the traffic?
      I set "Netbios over TCP/IP" .... and reboot both PC. I saw the content of PC "A" from "B" but now I have the same error.

      Both Firewall are disable and only "Symentec EdnPoint Protection v12" is installed the PC "A" but disable.

      But I can use the remote desktop ....

      Thanks for you help

      Regards,
      Last edited by Kris-I; 13th November 2009, 12:55.

      Comment


      • #4
        Re: Network trouble ...

        Originally posted by L4ndy View Post
        Hi,
        Have you got Netbios over TCP/IP enabled?
        Any antivirus software blocking the traffic?
        You was right on the both side "Symentec EndPoint Protection" blocked ...

        Thanks,

        Comment


        • #5
          Re: Network trouble ...

          Originally posted by Kris-I View Post
          I set "Netbios over TCP/IP" .... and reboot both PC. I saw the content of PC "A" from "B" but now I have the same error.

          Both Firewall are disable and only "Symentec EdnPoint Protection v12" is installed the PC "A" but disable.

          But I can use the remote desktop ....

          Thanks for you help

          Regards,
          SEP also has a built in firewall. I had the same issue with one of my PC's

          Comment

          Working...
          X