Announcement

Collapse
No announcement yet.

Autoenrollment problem with client machine.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Autoenrollment problem with client machine.

    Hi,

    I'm having a lot of problems with a client PC.

    After adding the PC to the domain, there were some error in the event log of the PC. All in french, so i won't post them here. But they were AutoEnrollment errors, Print errors and NETLOGON errors. They're all stating that they couldn't find DNS server or the domain controller (SBS 2003).

    I've tried deleting the PC from Active Directory and re-join it. Still same error. Tried uninstalling anti-virus and re-join it, same thing. I've verified the IP configuration settings, everything is perfectly fine. I've forced the DNS server to be the domain controller and still the same result.

    I'm running out of ideas regarding this problem, this is basically the only PC having this problem. Here are the basic part of the events:

    Type de l'événement*: Erreur
    Source de l'événement*: AutoEnrollment
    Catégorie de l'événement*: Aucun
    ID de l'événement*: 15

    Type de l'événement*: Erreur
    Source de l'événement*: Print
    Catégorie de l'événement*: Aucun
    ID de l'événement*: 33

    Type de l'événement*: Erreur
    Source de l'événement*: NETLOGON
    Catégorie de l'événement*: Aucun
    ID de l'événement*: 5719

    Any clue where to continue troublehsooting this problem ?

    Best regards,

    trep

  • #2
    Re: Autoenrollment problem with client machine.

    Did you join the XP machine to the SBS Domain using the Wizard or did you join it manually?
    1 1 was a racehorse.
    2 2 was 1 2.
    1 1 1 1 race 1 day,
    2 2 1 1 2

    Comment


    • #3
      Re: Autoenrollment problem with client machine.

      Joined it manually in computer properties.

      Comment


      • #4
        Re: Autoenrollment problem with client machine.

        Remove it manually from the Domain and use the Wizard (UTFW) in:
        Sever Management
        Computers
        Setup Client Computer
        and when finished, from the client IE browser
        http://servername/connectcomputer (or whatever the French equivalent is)

        See if that fixes the problem.

        Never connect manually to an SBS box ever again.
        Want to get up to speed on SBS 2003 very quickly, have a look at the SBS 2003 Train Signal Lab. http://www.trainsignal.com/Small-Bus...ining-P19.aspx
        Last edited by biggles77; 14th April 2009, 01:04.
        1 1 was a racehorse.
        2 2 was 1 2.
        1 1 1 1 race 1 day,
        2 2 1 1 2

        Comment

        Working...
        X